Researchers at the University of Arkansas have 3D-printed interlocking building blocks from simulated Moon dust, without any glue. The blocks are small and not strong enough yet to hold up a building, but the approach could eventually help build lunar bases from local material.
The work, published in npj Advanced Manufacturing, was led by Wan Shou, an assistant professor of mechanical engineering, with first author Cole McCallum, who was an undergraduate when the research was done.
How the bricks were made
The team used a commercial stand-in for lunar soil called LHS-1, which mimics the lunar highlands, rather than real Moon samples. They used a technique called laser powder bed fusion: a thin layer of powder is spread, a light source fuses the chosen spots, the platform drops slightly, and the process repeats. The university says a relatively low-power light source was enough, and no binder was needed. In McCallum’s words, “the regolith powder is binding to itself.”
The results are blocks a few centimeters across, shaped like crosses and the letter H, designed to fit together like toy bricks. That makes them reconfigurable: a structure could in principle be taken apart and rebuilt in a new layout.
Why the Moon needs this
Shipping construction material from Earth is extremely expensive, so space agencies and researchers have long looked at building with lunar regolith, the loose dust and rock covering the surface. Using it directly, with no added binder to bring along, would cut what has to be launched.
Why interlocking matters
Most lunar-construction proposals fuse or glue dust into fixed slabs. Blocks that snap together offer a different trade: a base could be assembled, rearranged or repaired with spare parts made on site. The Arkansas team’s shapes, crosses and H pieces, are a proof of concept for that idea rather than a design for a real wall.
It also shows a quirk of the method. Because nothing but the dust itself holds the block together, the particles are only partly fused, which is likely why the printed pieces are more porous and weaker than binder-based prints. That is the central trade-off the researchers will need to tune.
The catch
- The blocks have more internal pores and lower structural strength than binder-based prints, according to the university.
- They are only self-supporting. McCallum said he would be hesitant to claim the process could support other loads.
- The tests used a simulant, not actual lunar regolith.
- How the blocks behave in low gravity and vacuum is not yet known.
So this is an early lab result, not a construction method. The next steps are boosting strength and durability and testing under conditions closer to the Moon’s.
More on Contoh
- Europe’s Hera Probe Is Flying Rectangles Around the Asteroid NASA Hit in 2022
- Euclid Space Telescope Discovers Its First Comet, About 1.3 Billion Kilometers Away